Took the optic off and dripped some acetone in the screw holes and let it soak a few minutes. Dripped some more acetone then slowly worked the screw in and out a few times slowly going deeper. Cleaned everything up and did a dry fit (no loctite) and torqued them to 15 in/lbs. Felt solid and...
All of those things are possible but I will tinker with it a bit more before sending it back.
With that said I installed the optic with the tool that came with it and didn’t put a whole lot of pressure on it because I didn’t want to break or strip it. I have since ordered a torque screwdriver...
The screws came with the C&H Precision optics plate so I am pretty sure they are the correct length. One screw goes all the way down the other doesn’t.
The screw I am having trouble with is the one that wouldn’t come out that was factory installed. Eventually had to drill into the hex head and...
Did I read this right, they refer to them as semi-automatic bows and arrows wtf!! [emoji2359]
“Now, the Japanese government is considering banning most people from buying, selling, or owning these semi-automatic bow and arrows.”
Sent from my iPhone using Tapatalk Pro
Turned in paperwork and got printed at LSP in Baton Rouge on 4/12/18, issued date is 4/19/18 and received permit in the mail on 4/26/18.
Sent from my iPhone using Tapatalk Pro