Hate the 10-12lb clunky trigger on your MAS 36? I have found a fix. I replaced the sear spring with an X 74 thin wire spring and cut the firing pin spring to 4". I'm sorry for not taking pics but disassembly and assembly are available on utube. I left the hammer spring, as is, because it doubles as the ejector spring. I had placed a weaker spring in it but ejection was a little iffy. It effected the trigger pull about 1/2lb less.
I test fired 15 PPU 7.5 rounds and all fired. I am estimating a 4lb trigger pull, now. There is still room for improvement but some grinding of the sear will need to be done. Maybe later. Difference between a foggy night and a sunny day. Bolt is simple to disassemble. Push with palm of hand turn clockwise. Reverse to assemble.
I test fired 15 PPU 7.5 rounds and all fired. I am estimating a 4lb trigger pull, now. There is still room for improvement but some grinding of the sear will need to be done. Maybe later. Difference between a foggy night and a sunny day. Bolt is simple to disassemble. Push with palm of hand turn clockwise. Reverse to assemble.
Attachments
Last edited: