Essential Arms lower, Bushmaster upper,White Oak Armament 18" SS H-Bar .223 Wylde 1in7 twist rifle lenth gas system (turned down under hand guard to reduce weight),12" JP V-Tac hand guard,JP fire control group w/anti-walk pins, cobalt plated Bushmaster BCG,ACE skeleton stock, Ergo ambi grip,RRA Star safety,Railed gas block, Badger Tac Latch, cobalt plated Miculek comp, Millett DMS-1 1-4x scope w/quick throw lever in a Burris P.E.P.R. mount. Also, forward assist has been removed and replaced with EGW plug. Two 30 round P-Mags and Blackhawk Sportster case included. Less than 500 rounds fired. Valued at over $1500.00, asking $1100.00. No trades please. Need funds for another project. Located in LaPlace.
The .223 Wylde is a proprietary rifle cartridge chamber with the external dimensions and lead angle as found in the military 5.56×45mm NATO cartridge and the 0.2240 inch freebore diameter as found in the civilian SAAMI .223 Remington cartridge. Rifles with a .223 Wylde chamber will typically accept both .223 Remington and externally slightly larger 5.56×45mm NATO ammunition.[1]
The .223 Wylde hybrid chamber was designed by Bill Wylde of Greenup, Illinois, to exploit the accuracy advantages of the .223 Remington chambering without pressure problems or compromising the functional reliability of semi-auto weapons like the AR-15 family when using 5.56×45mm NATO military ammunition.[2]Coincidentally, it shoots the relatively long and heavy 80-grain (5.18 g) bullets commonly used in the Sport Rifle Competition very well and is one of the preferred chambers for that use. The Wylde chamber is used by a few rifle manufacturers who sell "National Match" configuration AR-15 rifles, barrels, and upper receivers.
The .223 Wylde is a proprietary rifle cartridge chamber with the external dimensions and lead angle as found in the military 5.56×45mm NATO cartridge and the 0.2240 inch freebore diameter as found in the civilian SAAMI .223 Remington cartridge. Rifles with a .223 Wylde chamber will typically accept both .223 Remington and externally slightly larger 5.56×45mm NATO ammunition.[1]
The .223 Wylde hybrid chamber was designed by Bill Wylde of Greenup, Illinois, to exploit the accuracy advantages of the .223 Remington chambering without pressure problems or compromising the functional reliability of semi-auto weapons like the AR-15 family when using 5.56×45mm NATO military ammunition.[2]Coincidentally, it shoots the relatively long and heavy 80-grain (5.18 g) bullets commonly used in the Sport Rifle Competition very well and is one of the preferred chambers for that use. The Wylde chamber is used by a few rifle manufacturers who sell "National Match" configuration AR-15 rifles, barrels, and upper receivers.
Last edited:
