Sin-ster
GM of 4 Letter Outbursts
$700 firm
(Stolen, sexy-stock photo. Not the actual gun.)
Includes 2 mags, never used.
This was my backup gun for last season. It's seen no more than 700 rounds; the APEX sear is a virgin.
This is the ideal, drop-in arrangement for a competition 9 Pro-- from front to back. Add mags and a rig, you're way ahead of the game.
Current guts:
APEX Competition AEK-- sear, plunger, springs, etc.
APEX RAM
SSS Stainless Steel Guide Rod (captured), ISMI 13# spring.
Warren/Sevigny Competition Sights-- flat black rear, FO front.
Included:
Everything from the factory, but the case.
Stock MiM sear, stock plunger, stock springs-- everything I gutted out of it.
2x Extra Power Magazine springs (SSS)
2x 13# ISMI recoil springs
2x Factory Magazine springs
2x magazine followers, new
Factory guide rod and spring.
Disclosures:
The gun is going to be slightly dirty. Oddly, the full armorer/detail strip parts (sear cage and contents, trigger bar, etc.) will all be clean-- just not the field strip stuff (slide, rails, etc).
The front sight took some nudging upon install. It is 100% unmarred where it matters-- just one wing in the dovetail, PURELY cosmetic-- and blackened as of now to cover it. (Slide itself was completely untouched, so no loss in the end.)
Contact/Pick Up:
PM, unless you have another way to reach me already-- in which case, you're always welcome!
FTF, will meet as far as I drive for any local match.
(Stolen, sexy-stock photo. Not the actual gun.)
Includes 2 mags, never used.
This was my backup gun for last season. It's seen no more than 700 rounds; the APEX sear is a virgin.
This is the ideal, drop-in arrangement for a competition 9 Pro-- from front to back. Add mags and a rig, you're way ahead of the game.
Current guts:
APEX Competition AEK-- sear, plunger, springs, etc.
APEX RAM
SSS Stainless Steel Guide Rod (captured), ISMI 13# spring.
Warren/Sevigny Competition Sights-- flat black rear, FO front.
Included:
Everything from the factory, but the case.
Stock MiM sear, stock plunger, stock springs-- everything I gutted out of it.
2x Extra Power Magazine springs (SSS)
2x 13# ISMI recoil springs
2x Factory Magazine springs
2x magazine followers, new
Factory guide rod and spring.
Disclosures:
The gun is going to be slightly dirty. Oddly, the full armorer/detail strip parts (sear cage and contents, trigger bar, etc.) will all be clean-- just not the field strip stuff (slide, rails, etc).
The front sight took some nudging upon install. It is 100% unmarred where it matters-- just one wing in the dovetail, PURELY cosmetic-- and blackened as of now to cover it. (Slide itself was completely untouched, so no loss in the end.)
Contact/Pick Up:
PM, unless you have another way to reach me already-- in which case, you're always welcome!
FTF, will meet as far as I drive for any local match.
Last edited: