Suppressor Help

[All Star]

I shoot 556 and 308 in the AR platform.
I also have one sig 556 pistol Ar with the brace

I had the atty draw up a trust today.
I want the purchase the locally recommended AAC SDN6 in 308 bc I was told I can shoot 308, 300, and 556 interchangeably with no problems or quality issues.

Am I missing anything guys? This suppressor is 1050 new.

I was also told it would only take 30 days to get that brace off, and convert to a legit SBR and can put a stock on it.

Any help or insight would be great!

 

[US Infidel]

Definitely go with a 30 cal can. I regret not doing that when I bought my 556 can. If I could pick one, that's the one I would get. Buy one in the next couple of days and get the $200 online store credit from AAC.

 

[kz45]

I recently purchased a silencer myself, a friend has the AAC and advised me to look at what others had to offer
I went with the silencerco Saker 7.62, it locks up better, the baffles are made of stronger material, you can change the end cap out and they make a mount to interface with all the other silencers mounts out there

 

[Bunk39]

+1. Get the 7.62 saker and get a 5.56 end cap from SilencerShop. The reports I've seen say that 5.56 is quieter in this configure than the dedicated 5.56 Saker. The can will be bigger than a 5.56 can though.


Sent from my iPhone using Tapatalk

 

[noob]

I have the aac 762sdn6 and couldn't me happier. I use it on my sig716 308, 10.5 inch 556 sbr's, and 9 inch 300blk, with zero issues. 51t mounts are widely available (for now) and at 1k it wasn't a overly pricey can. My brother uses an m4-2000 and there is about an inch difference in length.

 

[YoungMarine]

+1 for saker 7.62. Very pleased with results on .308 bolt gun, 11.5" 5.56, and 9" 300 blackout. It locks up really tight to the mounts as well.

 

[All Star]

Yall are making this hard now! Seems to be split between saker and AAC.
200 rebate would pay for both my mounts, bc they're 84 bucks on the website, and 150 at jims,.

 

[kengel2]

I don't have the saker......yet. Its been ordered though.

Sent from my Nexus 7 using Tapatalk

 

[Jasarii]

I have the 7.62 SDN-6 and use on 300BLK/5.56....Performs great on 5.56 with no issues. I really like mine and getting the $200 store credit from AAC was nice!

 

[LSUSMC]

Yall are making this hard now! Seems to be split between saker and AAC.
200 rebate would pay for both my mounts, bc they're 84 bucks on the website, and 150 at jims,.

Check you facts.

I purchased two blackout flash hiders from them a couple weeks ago for $89.95 each with the 10% bayoushooter discount. The blackout muzzle breaks were $150, same as on AAC's website.

 

[OtterBob]

I would love to tell you how well my Gemtech Quicksand functions, but I'm " waiting " on my stamp.

 

[noob]

Here's what the sdn6 looks like on an aac upper

 

[US Infidel]

That's is a bad ass noob

 

[rcm192]

Here's what the sdn6 looks like on an aac upper

Is that a aac complete upper?

 

[All Star]

Got my form 1 today submitted to change to SBR, and boght the AAC supressor.
Melissa at Jims was awesome as can be. Now the waiting...

 

[FD807]

Is Jims doing the engraving on the lower for you?

 

[noob]

Is that a aac complete upper?

Yes, its a complete AAC 9 inch upper, only thing changed is the rail was upgraded to a URX 4.0 over the standard URX that it normally comes with.

 

[All Star]

nobody mentioned anything about engraving. I thought they would just register the same serial number on the lower of the SB 15 I already have from Sig?

 

[JCcypress]

For engraving, I recommend Tsumara Designs in Baton Rouge.

Tsumaradesigns@gmail.com

 

[Hot Pepper]

nobody mentioned anything about engraving. I thought they would just register the same serial number on the lower of the SB 15 I already have from Sig?

The serial number of the lower will be registered, but since you are giving the lower to the trust, it must be shown "engraved" on the lower with the trust name, and city,state