Thinking about a MK12 clone.

The Best online firearms community in Louisiana.

Member Benefits:

  • Fewer Ads!
  • Discuss all aspects of firearm ownership
  • Discuss anti-gun legislation
  • Buy, sell, and trade in the classified section
  • Chat with Local gun shops, ranges, trainers & other businesses
  • Discover free outdoor shooting areas
  • View up to date on firearm-related events
  • Share photos & video with other members
  • ...and so much more!
  • enigmedic

    Well-Known Member
    Rating - 100%
    16   0   1
    Sep 14, 2010
    285
    28
    New Orleans area
    You would probably be better off just doing a commercial spr/ dmr. If you are just looking for a shooter, the rarity and cost of a Mark 12 are not feasible. Deviating from authentic parts means you'll be lucky to get the sum value of individual parts when you sell it. The Mk12 was intended to be used as a "system," using technologically matched ammo, suppressor, bdc optics, and rifles to achieve a result; remove any one of those 4 critical things and you just have an overpriced collection of spare parts that will not function as intended.
    I love clone rifles, because of the dedication and patience it takes to locate proper parts. There's a fork in the road: authentic clone correct items have great collector and historic value, although there are more modern/ functional things on the market. If you're going to do a clone you have to make it original /authentic, otherwise it has no collector value.
    The Daniel Defense is a great functional rifle, but has NO specification or cosmetic similarities to an actual Mk12. It is a Mk12 only in name. For the money you would spend, there are much better options; it leaves you with limited function and no historic value.
    If you like the Mod 1, there's never been a better time to get them. The Mk12 Mod 1 used to be the most expensive, but KAC has released a new batch of free float RAS rails, which is what's needed for Mod 1 and Navy RECCE rifle so difficult to get. It was used by Rangers and SEALs. Any deviation from issue / "in the wild" accessories kills value.
    The most economical and versatile option would be the Mod H, used by Army SF (still in production from PRI) and has more compact 16" barrel, compared to 18" of Mod0 and Mod1.
    By far the most versatile with the most value is 15.1" Navy Recce. Again, if you go the clone route, keep it authentic or you'll just be into a money pit that gives you the worst of both worlds.
     
    Last edited:
    Top Bottom