WTS: Romanian WASR-2 AK74, 5.45x39

[Obey]

Hey guys-

I am selling my Romanian WASR-2 because the sights need to be drifted a bit to the left, and I do not have an AK sight-drifting tool. I know it is flat out lazy, but it's a good excuse for me to buy another Daewoo, so be it.

Anyways, this WASR-2 has a brand new set of E. German furniture, and brand new E. German Bakelite 30rd. mag, and has been 100% functional in operation. Typical AK reliability.

It also has a sight rail, as pictured.

I've shot a couple hundred rounds of surplus 5.45 over 2 range trips, but I have always cleaned it immediately post-range, so no corrosion from the surplus ammo (if you buy this gun and shoot corrosive ammo through it, be sure to at least spray it out with Windex after a range visit if you do not plan on cleaning it immediately - the ammonia neutralizes the corrosive salts).

Again, the gun has been great, no problems, and low recoil, I just don't want to screw with the sights, especially since this is the only AK I own right now.

I'm asking what I paid for it before all of the Obama hype, $550.

Thanks-

J

 

[Obey]

BTW, if you'd rather have a plain black Bulgarian mag, I will swap it for the Bakelite. The Bakelites are, however, more valuable and just look so damn good with the E. German furniture.

 

[Manimal]

doesn't this need to have compliance parts?

 

[billy82269]

Yes, that rifle doesn't appear to have enough compliance parts. I wouldn't atempt to buy as is.

 

[CajunTim]

Why do ya'll feel it needs compliant parts? Is it because the furniture was changed I assume?

Do you have the original furniture?

 

[Obey]

I have the original furniture, definitely a US made pistol grip. I know there is quite a bit of US parts, including the Tapco G2 trigger. I think if the pistol grip is changed, it becomes "compliant." Consider the pistol grip in this picture to be for cosmetic, hypothetical, and non-terrorist purposes only.

J

 

[billy82269]

With G2 kit and US pistol grip, you still need US gas piston, and US mag follower or floorplate. both to be safe.

 

[Obey]

With G2 kit and US pistol grip, you still need US gas piston, and US mag follower or floorplate. both to be safe.

Gas piston is Tapco, AFAIK. The only non-US part that has been swapped for a US part is the pistol grip.

 

[billy82269]

Sorry last post was bad math. Your rifle doesn't have a muzzle devise so it has 15 parts as listed by ATF. 5 of those parts must be US made to have ten or less foriegn. G2 group counts as 3, US pistol grip 4. If you don't have the US gas piston take the mag out of the rifle to be compliant. mag counts as 3 parts: body, follower, floorplate

 

[Obey]

Sorry last post was bad math. Your rifle doesn't have a muzzle devise so it has 15 parts as listed by ATF. 5 of those parts must be US made to have ten or less foriegn. G2 group counts as 3, US pistol grip 4. If you don't have the US gas piston take the mag out of the rifle to be compliant. mag counts as 3 parts: body, follower, floorplate

Thanks for the clarification, billy. As mentioned above, gas piston is US, so if I swap the pistol grip, we are good.

I will give the buyer the E. German grip also, "just in case."

J

 

[billy82269]

Oh ok cool, with a tapco gas piston and US pistol grip it should be good to go with foriegn stock set and mag. Sorry for being so anal about this, just don't want someone to buy it and use it in legal self defense only to find themslves in jail for non 922r compliance

 

[Manimal]

its a good deal on a 5.45

If I could buy anything right now i would buy it after the compliance were met

very nice looking gun!

 

[Obey]

Oh ok cool, with a tapco gas piston and US pistol grip it should be good to go with foriegn stock set and mag. Sorry for being so anal about this, just don't want someone to buy it and use it in legal self defense only to find themslves in jail for non 922r compliance

I know. It's a shame isn't it? I think those foreign pistol grips make the rifle much more dangerous than the U.S. ones. Thank goodness for 922.

 

[Nomad.2nd]

Thanks for the clarification, billy. As mentioned above, gas piston is US, so if I swap the pistol grip, we are good.

I will give the buyer the E. German grip also, "just in case."

J

So, right now... You are posting Evidence that you hare commiting a crime...


Dude... CHANGE IT!!!!


Take the friggan mag out, pistol grip off... SOMETHING....

 

[Obey]

So, right now... You are posting Evidence that you hare commiting a crime...


Dude... CHANGE IT!!!!


Take the friggan mag out, pistol grip off... SOMETHING....

I gathered that from the earlier posts. Problem solved. I appreciate your concern. Relax.

 

[Mr_Willson]

under 500 dollars....awesome!

 

[Manimal]

I gathered that from the earlier posts. Problem solved. I appreciate your concern. Relax.

We're looking out for you man, and the web site, that's all...not uptight for no reason, its a serious crime to break federal gun laws...people have died over stuff like this little technicality. Look into Ruby Ridge if you havent studied it, important things to be learned.

We care man, that's all

Like I said, good deal on a good gun when the compliance issues are met, which seems to be the case.

 

[Nomad.2nd]

We're looking out for you man, and the web site, that's all...not uptight for no reason, its a serious crime to break federal gun laws...people have died over stuff like this little technicality. Look into Ruby Ridge if you havent studied it, important things to be learned.

We care man, that's all

Like I said, good deal on a good gun when the compliance issues are met, which seems to be the case.

What he said... I was just trying to make sure it was clearly understood.

I've alwasy liked the look of E German Furnature...

 

[whttnbrg]

I lay in bed at night and dream about what guns would be like without the compliance issues and it makes me happy Then my wife rolls over and thinks I am thinking about her and....... well, lets keep it G rated

 

[Nomad.2nd]

I lay in bed at night and dream about what guns would be like without the compliance issues and it makes me happy Then my wife rolls over and thinks I am thinking about her and....... well, lets keep it G rated

^ How about if there were no class 3 at all...


You could make your Own STENs, I could get a PKM, AK's wouldn't have to be butchered to come into this country...

(WHile your dreaming)