here goes. All items are in prairieville, in my possesion. Ive listed them in batches that i would like to sell together. The dies, i would prefer to go with either their respective brass or with the full set of gear, not alone. I listed alone so you can add that price to whatever your interested in. I would sell alone if needed but wont drive very far for a 15$ sale. All sales prefer to be FTF but will ship if really necessary. Selling due to getting out of reloading. Not worth my time anymore due to limited savings versus time spent for me. Contact me at 225-7*1*5-2*9*0*5. Joey. Or PM me here.
Press and Autoprime SPF.
40 S&W brass, very mixed, 1100+ total, 800 are sized and cleaned. 1/2 pound of HS-6 powder, and 500 CCI 500 small pistol primers=135$
RCBS 223/556 dies. Decapping pin is broken, needs another, they are cheap. 15$
RCBS 40 S&W/10mm carbide dies. 25$
Remainder of the gear listed below. Selling as a "starter" package. Everything you need minus dies/powder/primer/bullets/brass to load. Everything cept the press and tumbler is nearly new. 240$ (180$ without press and autoprime)
Included in remainder is:
Lee classic cast press, the pivot broke on it, i repaired it with factory parts once, and it broke again, so i repaired it with my materials, and its stronger than factory
Homeade shell tumbler. Ugly but it works.
Cleaning media (corn cob) and polish. Enough to use in this tumbler. Been used 3x.
Dillon Balance beam scale.
Lee powder thrower
Lee autoprime with both trays (large and small primer useable)
Trimmer with arbor for 223, but arbor is useable but needs replacing if you using it for lenght measurement (i was using stop on drill press)
lube pad with lube
Shell holder for trimmer for 223 (locks shell in place with a twist)
neck chamfer tool
cabelas case prep tools (includes neck chamfer tool, primer pocket cleaner, primer pocket chamfer tool, neck brushes)
If you purchase the gear, i will give you a class on how to prepare cases for loading. I will not teach you to load (for liability reasons).
Press and Autoprime SPF.
40 S&W brass, very mixed, 1100+ total, 800 are sized and cleaned. 1/2 pound of HS-6 powder, and 500 CCI 500 small pistol primers=135$
RCBS 223/556 dies. Decapping pin is broken, needs another, they are cheap. 15$
RCBS 40 S&W/10mm carbide dies. 25$
Remainder of the gear listed below. Selling as a "starter" package. Everything you need minus dies/powder/primer/bullets/brass to load. Everything cept the press and tumbler is nearly new. 240$ (180$ without press and autoprime)
Included in remainder is:
Lee classic cast press, the pivot broke on it, i repaired it with factory parts once, and it broke again, so i repaired it with my materials, and its stronger than factory
Homeade shell tumbler. Ugly but it works.
Cleaning media (corn cob) and polish. Enough to use in this tumbler. Been used 3x.
Dillon Balance beam scale.
Lee powder thrower
Lee autoprime with both trays (large and small primer useable)
Trimmer with arbor for 223, but arbor is useable but needs replacing if you using it for lenght measurement (i was using stop on drill press)
lube pad with lube
Shell holder for trimmer for 223 (locks shell in place with a twist)
neck chamfer tool
cabelas case prep tools (includes neck chamfer tool, primer pocket cleaner, primer pocket chamfer tool, neck brushes)
If you purchase the gear, i will give you a class on how to prepare cases for loading. I will not teach you to load (for liability reasons).
Last edited: