New Glock Trigger.

[JBP55]

Read about a new revised Glock trigger on Glock Talk.
Video by Johnny Glock.

 

[Jstudz220]

I just ordered a few of these. I’m excited to give them a try

 

[WhereIsIt?]

But I thought it was "perfection" as it is?

Tactitools and blanket statements... Welcome to Bayoushooter.

 

[buttanic]

From what I see it brings Glock inline with other striker fired guns in that the striker is held at full cock after the slide cycles instead of being brought to full cock by pulling the trigger. It turns it into a true single action system.

 

[sandman7925]

Ordered one. Good price if effective. Probably be out of stock soon. Those will sell like hotcakes.

 

[sandman7925]

Are LEO allowed to install aftermarket triggers in their guns? And if not I assume this would be ok as it’s not aftermarket.

 

[JBP55]

The new Glock trigger with a minus connector should come standard equipment from Glock in all the long slide models.

 

[JBP55]

Are LEO allowed to install aftermarket triggers in their guns? And if not I assume this would be ok as it’s not aftermarket.

No. Not unless approved by their department and installed by the department Armorer unless they shipped from the factory with the new trigger. LEA's do not normally allow triggers with a lighter trigger pull than factory. Glock should make the new trigger the OEM trigger in all new Gen 5 long slide models.

 

[La26]

We issue Glock 34 to road deputies, 17 or 19 to detectives. Deputies are not allowed to alter or modify their dept issued weapons in any way. If they choose to carry a personally owned Glock off duty, they can do what they want.

 

[SVT Bansheeman]

I wonder if they plan to come out with versions for gen 3 and 4. I assume they will release them for the slimline 9mm since they are so popular.

 

[AdvancedLaser]

Just ordered three for the shop.

 

[Jstudz220]

But I thought it was "perfection" as it is?

Tactitools and blanket statements... Welcome to Bayoushooter.

Duhh. These are obviously made for one of the many Glock clones on the market that are subpar such as the CZp10c

 

[Tboy]

I’m interested for sure.

Looks like Glock selling them for $99 but everyone else in the $85-$89 range. Cheaper ones seemed to be sold out everywhere.

 

[Jstudz220]

I’m interested for sure.

Looks like Glock selling them for $99 but everyone else in the $85-$89 range. Cheaper ones seemed to be sold out everywhere.

I ordered a few directly from Glock. It is actually my first order ever though Glock so I figured I’d cash in on one of the many 20% discounts I had from buying Glocks over the years. Seems like they did have some cheaper options elsewhere and probably faster shipping as well but I figured why not use 20% off and just wait it out.

I’ll post when they arrive hopefully before this weekend. I’m doubtful though after reading Glocks website it says they can take 1-2 weeks to ship and will send tracking when they do.

I plan on putting one in my G34 as soon as I get it along with a Glock - connector and getting to the range.

 

[JBP55]

I’m interested for sure.

Looks like Glock selling them for $99 but everyone else in the $85-$89 range. Cheaper ones seemed to be sold out everywhere.

Mine from Glock cost $113.

 

[AdvancedLaser]

Already had a customer ask me to get him five, lol....

 

[JBP55]

I ordered a few directly from Glock. It is actually my first order ever though Glock so I figured I’d cash in on one of the many 20% discounts I had from buying Glocks over the years. Seems like they did have some cheaper options elsewhere and probably faster shipping as well but I figured why not use 20% off and just wait it out.

I’ll post when they arrive hopefully before this weekend. I’m doubtful though after reading Glocks website it says they can take 1-2 weeks to ship and will send tracking when they do.

I plan on putting one in my G34 as soon as I get it along with a Glock - connector and getting to the range.

According to reports that combination should yield a sub 4# trigger pull.

 

[La26]

I hope someone gets them soon. Can't wait to hear the range report. Did I hear the video correctly that it reduces the trigger pull to about 2.5 lbs, and with the " - " connector it will be about 2 pounds??? Sounds awesome !!

 

[Jstudz220]

According to reports that combination should yield a sub 4# trigger pull.

That’s about what I’m expecting, right around 3.75lb with all oem internals and the - connector.

 

[Jstudz220]

I hope someone gets them soon. Can't wait to hear the range report. Did I hear the video correctly that it reduces the trigger pull to about 2.5 lbs, and with the " - " connector it will be about 2 pounds??? Sounds awesome !!

I saw a video where a guy was getting around 2.75lb trigger pulls but he was using an aftermarket connector, striker spring, firing pin block spring, and trigger spring.

I believe dropping it in as it comes from Glock with the . Connector you can expect around a 4lb trigger pull.