I have 500 reloads that were loaded for a .40 that I sold. (STI Edge). They were loaded a little long b/c the gun liked them. (All around 1.140 +/- .005, with a a few thousandths below 1.150 ) . The manual calls for 1.135 +/- .0005 for standard OAL.
Question- I have an M&P .40 that will go into battery with these rounds, but just not quite as smooth as a standard sized round. Powder charge was on the low side of SAMI specs,and its loaded with a RN lead bullet, just bullet seated a little long.
Want some guys with more experience than I have to see if they think that it is safe to try and run through the M&P or not before I scrap 500 rds.
Thanks
Question- I have an M&P .40 that will go into battery with these rounds, but just not quite as smooth as a standard sized round. Powder charge was on the low side of SAMI specs,and its loaded with a RN lead bullet, just bullet seated a little long.
Want some guys with more experience than I have to see if they think that it is safe to try and run through the M&P or not before I scrap 500 rds.
Thanks